LNIR
Impulse Relay
| Standards | IEC/EN 60669-2 | |
| Rated voltage | 250V AC (1P,2P) | |
| Rated frequency | 50/60Hz | |
| Maximum number of operations per minute | 5 | |
| Maximum number of switching operation a day | 100 | |
| Endurance | 200,000 cycles (AC21) | |
| 10 0,000 cycles (AC22) | ||
| Overvoltage category | Ⅳ | |
| Insulation voltage(Ui) | 440 V AC | |
| Pollution degree | 3 | |
| Rated impulse withstand voltage(Uimp) | 6kV | |
| Degree of protection (IEC 60529) |
Device only | IP20 |
| Device in modular | Ip40（Insulation class II) | |
| Operating temperature | -5℃~+60℃ | |
| Storage temperature | -40℃~+70℃ | |
| Tropicalization (IEC 60068.1) | Treatment 2 (relative humidity 95 % at 55℃） |
|
| Dissipated power (during the impulse) | 19 VA | |
| Illuminated PB control | Max. current 3 mA (if > use an ATLz) | |
| Operating threshold | Min. 85 % of Un | |
| Duration of the control order | 50 ms to 1s (200 ms recommended) | |
| Response time | 50ms | |
